{"product_id":"dezar-skyline-4p-elite-four-post-alignment-lift-13200lb","title":"Dezar Skyline 4P Elite Four-Post Alignment Lift | 13,200 lb Capacity | Center Scissor Jack Bridge | Pneumatic Safety Locks | 220V","description":"\u003csection class=\"pgs-intro\"\u003e\n  \u003cp\u003eThe Dezar Skyline 4P Elite is a professional-grade four-post drive-on alignment lift rated to 13,200 lb (6,000 kg) total runway capacity with a 6,000 lb (2,700 kg) center scissor jacking bridge. At approximately 17.4 ft overall length with ramps (530 cm), 20.5 in runway width (52 cm each), and 72.8 in maximum lift height (185 cm), it is built for professional alignment bays and serious home shops that need wheel-off service capability on cars, SUVs, and light-duty trucks. Diamond-plate runways, pneumatic multi-position safety locks, hydraulic power unit, alignment-ready runway provisions for turnplates and slip plates, and boxed high-tensile powder-coated steel posts combine to deliver a lift built for daily professional use. Requires a 220V single-phase 20A dedicated circuit. Backed by a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-why-choose\"\u003e\n  \u003ch2\u003eWhy Customers Choose the Dezar Skyline 4P Elite\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e13,200 lb (6,000 kg) total runway capacity — handles cars, SUVs, crossovers, and light-duty trucks\u003c\/li\u003e\n    \u003cli\u003eCenter scissor jacking bridge rated to 6,000 lb (2,700 kg) enables wheel-off service: tires, brakes, suspension, and wheel alignment\u003c\/li\u003e\n    \u003cli\u003ePneumatic multi-position safety locks engage automatically at set heights — no manual lock pins to forget\u003c\/li\u003e\n    \u003cli\u003eAlignment-ready runways with provisions for turnplates and slip plates for four-wheel alignment work\u003c\/li\u003e\n    \u003cli\u003eDrive-on loading via extended steel ramps with diamond-plate texture for confident, safe vehicle entry\u003c\/li\u003e\n    \u003cli\u003e72.8 in (185 cm) maximum lift height provides full under-vehicle access for drivetrain, exhaust, and suspension service\u003c\/li\u003e\n    \u003cli\u003eBoxed high-tensile steel posts, cross-beam guides, and industrial-grade hydraulic lines for commercial-grade structural integrity\u003c\/li\u003e\n    \u003cli\u003e5-year frame and runway warranty and 3-year hydraulics and power unit warranty\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-highlights\"\u003e\n  \u003ch2\u003eProduct Highlights\u003c\/h2\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-capacity\"\u003e13,200 lb Total Runway Capacity\u003c\/h3\u003e\n    \u003cp\u003eThe Skyline 4P Elite is rated to 13,200 lb (6,000 kg) total gross vehicle weight across the four-post runway system. This covers the full range of standard passenger cars, SUVs, crossovers, and light-duty trucks. Capacity is distributed across four posts — the runway system is designed so that no single post bears the full vehicle load, providing a stable, level platform under load. Do not exceed the rated capacity; consult the manufacturer’s specification sheet for per-runway load distribution limits.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-bridge\"\u003eCenter Scissor Jacking Bridge — 6,000 lb Capacity\u003c\/h3\u003e\n    \u003cp\u003eThe center scissor jacking bridge is what separates an alignment lift from a standard four-post storage lift. Rated to 6,000 lb (2,700 kg), the bridge positions under the vehicle between the runway spans and lifts one or both axles independently off the runways, freeing the wheels for rotation, brake service, suspension work, and the wheel alignment procedure itself. Without a jacking bridge, a four-post lift cannot perform wheel-off service — the vehicle wheels remain in contact with the runways. The scissor bridge design provides a compact, low-profile unit that stores beneath the runways when not in use.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-locks\"\u003ePneumatic Multi-Position Safety Locks\u003c\/h3\u003e\n    \u003cp\u003eThe pneumatic safety lock system engages automatically at each set height position as the lift rises — the locks do not require manual pin insertion by the operator. This eliminates the risk of forgetting to engage manual locks before working under a raised vehicle, which is one of the primary causes of lift-related accidents in shop environments. The multi-position design allows the lift to be locked at multiple working heights to suit different service tasks. Pneumatic engagement requires a compressed air supply connected to the lift.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-alignment\"\u003eAlignment-Ready Runways with Turnplate and Slip Plate Provisions\u003c\/h3\u003e\n    \u003cp\u003eThe runways are machined level and include provisions — cutouts and recesses — for installing turnplates at the front wheels and slip plates at the rear wheels, the hardware required for a proper four-wheel alignment procedure. Turnplates and slip plates are not included and must be sourced separately to match your alignment equipment brand and model. Confirm compatibility with your alignment system before ordering if four-wheel alignment is the primary intended use.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-runways\"\u003eDiamond-Plate Drive-On Runways with Extended Steel Ramps\u003c\/h3\u003e\n    \u003cp\u003eThe 52 cm (20.5 in) wide diamond-plate runways provide a textured, slip-resistant loading surface for vehicle tires during drive-on loading. Extended steel ramps at each end of the runways provide a gradual angle of approach that accommodates low-clearance vehicles with minimal ground clearance risk during loading. The drive-on design eliminates the need for vehicle lift points, floor jacks, or adapter pads required on two-post and scissor lift designs.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-structure\"\u003eBoxed High-Tensile Steel Post and Frame Construction\u003c\/h3\u003e\n    \u003cp\u003eThe four posts use boxed high-tensile steel construction with cross-beam guides and industrial-grade hydraulic lines. Boxed post construction — a closed rectangular tube section rather than a C-channel or open profile — provides superior rigidity and resistance to lateral deflection under load compared to open-profile alternatives. Zinc-plated fasteners throughout resist corrosion in the shop environment.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-hydraulic\"\u003eHydraulic Power Unit\u003c\/h3\u003e\n    \u003cp\u003eThe integrated hydraulic power unit drives synchronized lifting across all four posts via industrial-grade hydraulic lines. Synchronized lift ensures the vehicle platform rises level without front-to-rear or side-to-side differential, which is particularly important during alignment procedures where platform level directly affects measurement accuracy. The power unit requires a 220V single-phase 20A dedicated circuit.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"pgs-highlight-item\"\u003e\n    \u003ch3 class=\"icon-warranty\"\u003e5-Year Frame \u0026amp; Runway Warranty \/ 3-Year Hydraulics \u0026amp; Power Unit Warranty\u003c\/h3\u003e\n    \u003cp\u003eThe Skyline 4P Elite is backed by a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty, subject to proper professional installation, correct electrical supply, and adherence to the recommended maintenance schedule.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-specs\"\u003e\n  \u003ch2\u003eSpecifications\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLift Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFour-post drive-on alignment lift\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal Runway Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13,200 lb \/ 6,000 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacking Bridge Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6,000 lb \/ 2,700 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOverall Length (with ramps)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~17.4 ft \/ 530 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRunway Width (each)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~20.5 in \/ 52 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Lift Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~72.8 in \/ 185 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-tensile powder-coated steel, boxed posts\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRunway Surface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDiamond-plate steel\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFasteners\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eZinc-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePneumatic multi-position automatic safety locks\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJacking Bridge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCenter scissor design\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlignment Provisions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTurnplate and slip plate cutouts (hardware not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220V single-phase, 20A dedicated circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Supply Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes (for pneumatic safety locks)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame \u0026amp; Runway Warranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHydraulics \u0026amp; Power Unit Warranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ecl-03014\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-ideal-for\"\u003e\n  \u003ch2\u003eIdeal For\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eProfessional alignment bays requiring a four-post drive-on lift with integrated scissor jacking bridge for wheel-off alignment work\u003c\/li\u003e\n    \u003cli\u003eIndependent repair shops, tire shops, and suspension specialists needing a high-capacity lift for cars, SUVs, and light-duty trucks\u003c\/li\u003e\n    \u003cli\u003eSerious home shop builders who want professional-grade alignment capability and full under-vehicle access in their own garage\u003c\/li\u003e\n    \u003cli\u003eDetail shops, restoration shops, and show car preparation facilities where drive-on convenience and a clean shop aesthetic matter\u003c\/li\u003e\n    \u003cli\u003eShops upgrading from a two-post or standard storage four-post lift who need the alignment bridge capability the Skyline 4P Elite provides\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-maintenance\"\u003e\n  \u003ch2\u003eMaintenance Schedule\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDaily:\u003c\/strong\u003e Inspect pneumatic safety locks and air lines for correct engagement and leaks. Clean diamond-plate runways and ramps of fluid spills, oil, and debris — fluid contamination on runways is a slip hazard during vehicle loading and unloading.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeekly:\u003c\/strong\u003e Verify cable tension and anchor bolt torque. Lubricate carriage sheaves, hinge points, and ramp pivot hardware per the manufacturer’s lubrication schedule. Check hydraulic lines and fittings for leaks.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAnnually:\u003c\/strong\u003e Replace hydraulic oil and filters per the manufacturer’s specification. Level and calibrate alignment runway surfaces to confirm they remain within specification for accurate alignment readings. Inspect post welds and structural connections.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-important\"\u003e\n  \u003ch2\u003eImportant Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e220V dedicated circuit required:\u003c\/strong\u003e The Skyline 4P Elite requires a 220V single-phase 20A dedicated circuit. This is not a standard 110V outlet — if your shop or garage does not already have a 220V circuit at the lift installation location, electrical work by a licensed electrician is required before installation. Confirm your electrical supply before ordering.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompressed air required:\u003c\/strong\u003e The pneumatic safety lock system requires a compressed air supply connected to the lift. If your shop does not have a compressor and air line at the lift location, this must be planned as part of the installation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProfessional installation required:\u003c\/strong\u003e Four-post lifts of this size and capacity must be installed by a qualified lift installer. Proper floor anchoring, post leveling, cable tensioning, hydraulic line connection, and electrical connection are all required for safe operation. Improper installation creates serious safety risks and will void the warranty.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFloor requirements:\u003c\/strong\u003e The lift must be installed on a reinforced concrete floor of sufficient thickness and strength to support the anchoring system and rated load. Minimum floor specifications vary by jurisdiction and installation conditions — consult your installer and the manufacturer’s installation manual before ordering if you have questions about your floor.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTurnplates and slip plates not included:\u003c\/strong\u003e The alignment runway provisions (cutouts and recesses) are included, but turnplates and slip plates must be sourced separately. Confirm compatibility with your alignment equipment brand and model before purchasing these accessories.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCeiling height clearance:\u003c\/strong\u003e The maximum lift height is approximately 72.8 in (185 cm). Your garage or shop ceiling must provide adequate clearance above the vehicle at maximum lift height — add the maximum lift height to the height of the tallest vehicle you intend to service and confirm this does not exceed your ceiling height.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShipping:\u003c\/strong\u003e This lift ships via freight in multiple packages due to its size and weight. Delivery is to a curbside or accessible ground-level location. Coordinate with your installer for receipt, staging, and installation.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-faq\"\u003e\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat is the difference between an alignment lift and a standard storage four-post lift?\u003c\/summary\u003e\n    \u003cp\u003eA standard four-post storage lift raises a vehicle for storage or basic under-vehicle access, but the vehicle wheels remain on the runways at all times — you cannot perform wheel-off service (tire removal, brake work, suspension, or alignment) without a secondary jack. An alignment lift includes a center scissor jacking bridge that lifts one or both axles off the runways, freeing the wheels for wheel-off service. The Skyline 4P Elite’s integrated 6,000 lb jacking bridge is what makes it an alignment lift rather than a storage lift.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eDo turnplates and slip plates come with the lift?\u003c\/summary\u003e\n    \u003cp\u003eNo. The runways include cutouts and recesses provisioned for turnplates and slip plates, but the turnplates and slip plates themselves must be purchased separately. They need to be compatible with your specific alignment equipment brand and model. Confirm compatibility before ordering the accessories.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat electrical supply does this lift require?\u003c\/summary\u003e\n    \u003cp\u003eThe Skyline 4P Elite requires a 220V single-phase 20A dedicated circuit. This is not a standard 110V household outlet. If your shop or garage does not have a 220V circuit at the installation location, you will need a licensed electrician to install one before the lift can be commissioned. Confirm your electrical supply and plan accordingly before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eDoes this lift require compressed air?\u003c\/summary\u003e\n    \u003cp\u003eYes. The pneumatic safety lock system requires a compressed air supply connected to the lift. If your shop does not have a compressor and air line at the lift location, this needs to be part of your installation planning.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat ceiling height do I need?\u003c\/summary\u003e\n    \u003cp\u003eThe maximum lift height is approximately 72.8 in (185 cm). To determine the minimum ceiling height you need, add the maximum lift height to the roof height of the tallest vehicle you plan to service on the lift, plus a working clearance margin. For example: a 60 in tall SUV + 72.8 in lift height = 132.8 in minimum, or about 11 ft of ceiling height. Confirm your ceiling height against your actual vehicle dimensions before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat vehicles can this lift handle?\u003c\/summary\u003e\n    \u003cp\u003eThe Skyline 4P Elite is rated to 13,200 lb (6,000 kg) total capacity and accommodates standard passenger cars, SUVs, crossovers, and light-duty trucks within the runway length and width. The 52 cm (20.5 in) runway width accommodates standard tire widths. Verify that your specific vehicle’s wheelbase and track width are compatible with the runway dimensions before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat floor does this lift require?\u003c\/summary\u003e\n    \u003cp\u003eThe lift must be installed on a reinforced concrete floor of sufficient thickness and compressive strength to support the post anchoring system under rated load. Minimum floor specifications vary — consult the manufacturer’s installation manual and your installer before ordering if you have questions about your floor’s suitability.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails class=\"pgs-faq-item\"\u003e\n    \u003csummary\u003eWhat are the warranty terms?\u003c\/summary\u003e\n    \u003cp\u003eThe Skyline 4P Elite carries a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty, subject to proper professional installation, correct electrical and air supply, and adherence to the recommended maintenance schedule. Contact us for full warranty documentation.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pgs-closing\"\u003e\n  \u003cp\u003eThe Dezar Skyline 4P Elite is a professional-grade alignment lift for shops and serious home builders who need real wheel-off service capability — not just a storage lift. If you are specifying a lift for an alignment bay or a shop where alignment work is part of the regular service menu, this is a well-built, properly specified option at a transparent price. Contact us before ordering with questions about electrical supply, floor requirements, ceiling clearance, or turnplate and slip plate compatibility.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between an alignment lift and a standard storage four-post lift?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A storage lift keeps wheels on the runways at all times. An alignment lift includes a center scissor jacking bridge that lifts axles off the runways for wheel-off service. The Skyline 4P Elite\\u2019s 6,000 lb integrated jacking bridge is what makes it an alignment lift.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do turnplates and slip plates come with the lift?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. The runway provisions are included, but turnplates and slip plates must be purchased separately and must be compatible with your alignment equipment brand and model.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What electrical supply does this lift require?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A 220V single-phase 20A dedicated circuit is required \\u2014 not a standard 110V outlet. If your shop does not have a 220V circuit at the installation location, a licensed electrician must install one before commissioning.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does this lift require compressed air?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The pneumatic safety lock system requires a compressed air supply. Plan for a compressor and air line at the lift location as part of your installation.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What ceiling height do I need?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Add the maximum lift height (72.8 in \/ 185 cm) to the roof height of your tallest vehicle plus a working clearance margin. Example: a 60 in tall SUV + 72.8 in lift height = ~132.8 in minimum, or about 11 ft of ceiling clearance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What vehicles can this lift handle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Skyline 4P Elite handles cars, SUVs, crossovers, and light-duty trucks up to 13,200 lb (6,000 kg) total. Verify your vehicle\\u2019s wheelbase and track width against the runway dimensions before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What floor does this lift require?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A reinforced concrete floor of sufficient thickness and compressive strength for the post anchoring system under rated load. Consult the manufacturer\\u2019s installation manual and your installer for minimum floor specifications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What are the warranty terms?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"5-year frame and runway warranty and 3-year hydraulics and power unit warranty, subject to proper professional installation, correct electrical and air supply, and adherence to the maintenance schedule.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Premium Garage Systems","offers":[{"title":"Default Title","offer_id":48101241094401,"sku":"cl-03014","price":8559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/3198\/8481\/files\/20250912_0058_Auto_20Lift_20Display_remix_01k4wva19ge8aa91gb09v7bjg3.png?v=1771739403","url":"https:\/\/premiumgaragesystems.com\/products\/dezar-skyline-4p-elite-four-post-alignment-lift-13200lb","provider":"Premium Garage Systems","version":"1.0","type":"link"}