Dezar Skyline 4P Elite Four-Post Alignment Lift | 13,200 lb Capacity | Center Scissor Jack Bridge | Pneumatic Safety Locks | 220V
Choose options
The Dezar Skyline 4P Elite is a professional-grade four-post drive-on alignment lift rated to 13,200 lb (6,000 kg) total runway capacity with a 6,000 lb (2,700 kg) center scissor jacking bridge. At approximately 17.4 ft overall length with ramps (530 cm), 20.5 in runway width (52 cm each), and 72.8 in maximum lift height (185 cm), it is built for professional alignment bays and serious home shops that need wheel-off service capability on cars, SUVs, and light-duty trucks. Diamond-plate runways, pneumatic multi-position safety locks, hydraulic power unit, alignment-ready runway provisions for turnplates and slip plates, and boxed high-tensile powder-coated steel posts combine to deliver a lift built for daily professional use. Requires a 220V single-phase 20A dedicated circuit. Backed by a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty.
Why Customers Choose the Dezar Skyline 4P Elite
- 13,200 lb (6,000 kg) total runway capacity — handles cars, SUVs, crossovers, and light-duty trucks
- Center scissor jacking bridge rated to 6,000 lb (2,700 kg) enables wheel-off service: tires, brakes, suspension, and wheel alignment
- Pneumatic multi-position safety locks engage automatically at set heights — no manual lock pins to forget
- Alignment-ready runways with provisions for turnplates and slip plates for four-wheel alignment work
- Drive-on loading via extended steel ramps with diamond-plate texture for confident, safe vehicle entry
- 72.8 in (185 cm) maximum lift height provides full under-vehicle access for drivetrain, exhaust, and suspension service
- Boxed high-tensile steel posts, cross-beam guides, and industrial-grade hydraulic lines for commercial-grade structural integrity
- 5-year frame and runway warranty and 3-year hydraulics and power unit warranty
Product Highlights
13,200 lb Total Runway Capacity
The Skyline 4P Elite is rated to 13,200 lb (6,000 kg) total gross vehicle weight across the four-post runway system. This covers the full range of standard passenger cars, SUVs, crossovers, and light-duty trucks. Capacity is distributed across four posts — the runway system is designed so that no single post bears the full vehicle load, providing a stable, level platform under load. Do not exceed the rated capacity; consult the manufacturer’s specification sheet for per-runway load distribution limits.
Center Scissor Jacking Bridge — 6,000 lb Capacity
The center scissor jacking bridge is what separates an alignment lift from a standard four-post storage lift. Rated to 6,000 lb (2,700 kg), the bridge positions under the vehicle between the runway spans and lifts one or both axles independently off the runways, freeing the wheels for rotation, brake service, suspension work, and the wheel alignment procedure itself. Without a jacking bridge, a four-post lift cannot perform wheel-off service — the vehicle wheels remain in contact with the runways. The scissor bridge design provides a compact, low-profile unit that stores beneath the runways when not in use.
Pneumatic Multi-Position Safety Locks
The pneumatic safety lock system engages automatically at each set height position as the lift rises — the locks do not require manual pin insertion by the operator. This eliminates the risk of forgetting to engage manual locks before working under a raised vehicle, which is one of the primary causes of lift-related accidents in shop environments. The multi-position design allows the lift to be locked at multiple working heights to suit different service tasks. Pneumatic engagement requires a compressed air supply connected to the lift.
Alignment-Ready Runways with Turnplate and Slip Plate Provisions
The runways are machined level and include provisions — cutouts and recesses — for installing turnplates at the front wheels and slip plates at the rear wheels, the hardware required for a proper four-wheel alignment procedure. Turnplates and slip plates are not included and must be sourced separately to match your alignment equipment brand and model. Confirm compatibility with your alignment system before ordering if four-wheel alignment is the primary intended use.
Diamond-Plate Drive-On Runways with Extended Steel Ramps
The 52 cm (20.5 in) wide diamond-plate runways provide a textured, slip-resistant loading surface for vehicle tires during drive-on loading. Extended steel ramps at each end of the runways provide a gradual angle of approach that accommodates low-clearance vehicles with minimal ground clearance risk during loading. The drive-on design eliminates the need for vehicle lift points, floor jacks, or adapter pads required on two-post and scissor lift designs.
Boxed High-Tensile Steel Post and Frame Construction
The four posts use boxed high-tensile steel construction with cross-beam guides and industrial-grade hydraulic lines. Boxed post construction — a closed rectangular tube section rather than a C-channel or open profile — provides superior rigidity and resistance to lateral deflection under load compared to open-profile alternatives. Zinc-plated fasteners throughout resist corrosion in the shop environment.
Hydraulic Power Unit
The integrated hydraulic power unit drives synchronized lifting across all four posts via industrial-grade hydraulic lines. Synchronized lift ensures the vehicle platform rises level without front-to-rear or side-to-side differential, which is particularly important during alignment procedures where platform level directly affects measurement accuracy. The power unit requires a 220V single-phase 20A dedicated circuit.
5-Year Frame & Runway Warranty / 3-Year Hydraulics & Power Unit Warranty
The Skyline 4P Elite is backed by a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty, subject to proper professional installation, correct electrical supply, and adherence to the recommended maintenance schedule.
Specifications
| Lift Type | Four-post drive-on alignment lift |
| Total Runway Capacity | 13,200 lb / 6,000 kg |
| Jacking Bridge Capacity | 6,000 lb / 2,700 kg |
| Overall Length (with ramps) | ~17.4 ft / 530 cm |
| Runway Width (each) | ~20.5 in / 52 cm |
| Maximum Lift Height | ~72.8 in / 185 cm |
| Frame Material | High-tensile powder-coated steel, boxed posts |
| Runway Surface | Diamond-plate steel |
| Fasteners | Zinc-plated |
| Safety System | Pneumatic multi-position automatic safety locks |
| Jacking Bridge | Center scissor design |
| Alignment Provisions | Turnplate and slip plate cutouts (hardware not included) |
| Power Requirements | 220V single-phase, 20A dedicated circuit |
| Air Supply Required | Yes (for pneumatic safety locks) |
| Frame & Runway Warranty | 5 years |
| Hydraulics & Power Unit Warranty | 3 years |
| SKU | cl-03014 |
Ideal For
- Professional alignment bays requiring a four-post drive-on lift with integrated scissor jacking bridge for wheel-off alignment work
- Independent repair shops, tire shops, and suspension specialists needing a high-capacity lift for cars, SUVs, and light-duty trucks
- Serious home shop builders who want professional-grade alignment capability and full under-vehicle access in their own garage
- Detail shops, restoration shops, and show car preparation facilities where drive-on convenience and a clean shop aesthetic matter
- Shops upgrading from a two-post or standard storage four-post lift who need the alignment bridge capability the Skyline 4P Elite provides
Maintenance Schedule
- Daily: Inspect pneumatic safety locks and air lines for correct engagement and leaks. Clean diamond-plate runways and ramps of fluid spills, oil, and debris — fluid contamination on runways is a slip hazard during vehicle loading and unloading.
- Weekly: Verify cable tension and anchor bolt torque. Lubricate carriage sheaves, hinge points, and ramp pivot hardware per the manufacturer’s lubrication schedule. Check hydraulic lines and fittings for leaks.
- Annually: Replace hydraulic oil and filters per the manufacturer’s specification. Level and calibrate alignment runway surfaces to confirm they remain within specification for accurate alignment readings. Inspect post welds and structural connections.
Important Information
- 220V dedicated circuit required: The Skyline 4P Elite requires a 220V single-phase 20A dedicated circuit. This is not a standard 110V outlet — if your shop or garage does not already have a 220V circuit at the lift installation location, electrical work by a licensed electrician is required before installation. Confirm your electrical supply before ordering.
- Compressed air required: The pneumatic safety lock system requires a compressed air supply connected to the lift. If your shop does not have a compressor and air line at the lift location, this must be planned as part of the installation.
- Professional installation required: Four-post lifts of this size and capacity must be installed by a qualified lift installer. Proper floor anchoring, post leveling, cable tensioning, hydraulic line connection, and electrical connection are all required for safe operation. Improper installation creates serious safety risks and will void the warranty.
- Floor requirements: The lift must be installed on a reinforced concrete floor of sufficient thickness and strength to support the anchoring system and rated load. Minimum floor specifications vary by jurisdiction and installation conditions — consult your installer and the manufacturer’s installation manual before ordering if you have questions about your floor.
- Turnplates and slip plates not included: The alignment runway provisions (cutouts and recesses) are included, but turnplates and slip plates must be sourced separately. Confirm compatibility with your alignment equipment brand and model before purchasing these accessories.
- Ceiling height clearance: The maximum lift height is approximately 72.8 in (185 cm). Your garage or shop ceiling must provide adequate clearance above the vehicle at maximum lift height — add the maximum lift height to the height of the tallest vehicle you intend to service and confirm this does not exceed your ceiling height.
- Shipping: This lift ships via freight in multiple packages due to its size and weight. Delivery is to a curbside or accessible ground-level location. Coordinate with your installer for receipt, staging, and installation.
Frequently Asked Questions
What is the difference between an alignment lift and a standard storage four-post lift?
A standard four-post storage lift raises a vehicle for storage or basic under-vehicle access, but the vehicle wheels remain on the runways at all times — you cannot perform wheel-off service (tire removal, brake work, suspension, or alignment) without a secondary jack. An alignment lift includes a center scissor jacking bridge that lifts one or both axles off the runways, freeing the wheels for wheel-off service. The Skyline 4P Elite’s integrated 6,000 lb jacking bridge is what makes it an alignment lift rather than a storage lift.
Do turnplates and slip plates come with the lift?
No. The runways include cutouts and recesses provisioned for turnplates and slip plates, but the turnplates and slip plates themselves must be purchased separately. They need to be compatible with your specific alignment equipment brand and model. Confirm compatibility before ordering the accessories.
What electrical supply does this lift require?
The Skyline 4P Elite requires a 220V single-phase 20A dedicated circuit. This is not a standard 110V household outlet. If your shop or garage does not have a 220V circuit at the installation location, you will need a licensed electrician to install one before the lift can be commissioned. Confirm your electrical supply and plan accordingly before ordering.
Does this lift require compressed air?
Yes. The pneumatic safety lock system requires a compressed air supply connected to the lift. If your shop does not have a compressor and air line at the lift location, this needs to be part of your installation planning.
What ceiling height do I need?
The maximum lift height is approximately 72.8 in (185 cm). To determine the minimum ceiling height you need, add the maximum lift height to the roof height of the tallest vehicle you plan to service on the lift, plus a working clearance margin. For example: a 60 in tall SUV + 72.8 in lift height = 132.8 in minimum, or about 11 ft of ceiling height. Confirm your ceiling height against your actual vehicle dimensions before ordering.
What vehicles can this lift handle?
The Skyline 4P Elite is rated to 13,200 lb (6,000 kg) total capacity and accommodates standard passenger cars, SUVs, crossovers, and light-duty trucks within the runway length and width. The 52 cm (20.5 in) runway width accommodates standard tire widths. Verify that your specific vehicle’s wheelbase and track width are compatible with the runway dimensions before ordering.
What floor does this lift require?
The lift must be installed on a reinforced concrete floor of sufficient thickness and compressive strength to support the post anchoring system under rated load. Minimum floor specifications vary — consult the manufacturer’s installation manual and your installer before ordering if you have questions about your floor’s suitability.
What are the warranty terms?
The Skyline 4P Elite carries a 5-year frame and runway warranty and a 3-year hydraulics and power unit warranty, subject to proper professional installation, correct electrical and air supply, and adherence to the recommended maintenance schedule. Contact us for full warranty documentation.
The Dezar Skyline 4P Elite is a professional-grade alignment lift for shops and serious home builders who need real wheel-off service capability — not just a storage lift. If you are specifying a lift for an alignment bay or a shop where alignment work is part of the regular service menu, this is a well-built, properly specified option at a transparent price. Contact us before ordering with questions about electrical supply, floor requirements, ceiling clearance, or turnplate and slip plate compatibility.